| Return to Index. |
Keys used at various points during the design process.
NOTE - these are the default settings - many of these keys can be changed. See Keyboard shortcuts for details.
F1 - Edit the currently selected unit.
F9 - duplicate the currently selected unit or repeat the last unit to be created on your design. The new item will appear to the right of the selected item, or on the end of the current run of cabinets.
Control + Z - undo last action.
Control + Shift + Z - undo last undo.
Delete / Del - delete the currently selected item(s).
Return to top.
Control + Shift + hold down left mouse - move plan around design area.
Control + Shift + hold down right mouse - pushing the mouse up/down zooms in/out on your design.
Control + C - copy the current selected item(s).
Control + V - paste in any copied items. They will appear at the current mouse position.
Return to top.
Cursor keys - move the camera up, down, to the left and to the right of the plan.
"a" and "c" - rotate the camera anti-clockwise (a) or clockwise (c).
"1" and "2" - moves the cut line forward (1) or backward (2). Use the cut line to remove items that are blocking your view. Any items behind the cut line will not be shown.
"w" and "n" - make the viewing angle wider and narrower.
"+" and "-" - make the camera larger (+) or smaller (-). Larger camera increases the area of the plan in your view. Smaller camera may ne needed when viewing smaller rooms.
Return to top.
Return to top.